How to Calculate a Profitable Rate Per Mile for Owner-Operators
Every owner-operator gets asked the same question a dozen times a week: what's your rate? The broker's answer is whatever the market will bear. Yours should be a number you worked out before the phone rang — the lowest rate per mile at which a load pays your costs, pays you, and leaves something for the business.
This guide builds that number from scratch in seven steps, with a worked example you can follow along in the cost per mile calculator and test against real loads in the rate per mile calculator. All the example figures are illustrative — replace each one with your own.
Loaded rate vs. all-in rate
Two different "rates per mile" get thrown around, and mixing them up is the most common way owner-operators fool themselves.
- Rate per loaded mile = what the load pays ÷ loaded miles. This is what brokers and load boards quote.
- All-in rate per mile = what the load pays ÷ (loaded miles + deadhead miles). This is what your truck actually earns for every mile it turns.
Your costs accrue on every mile, loaded or empty, so you have two honest options: compare the all-in rate with your cost per total mile, or compare the loaded rate with your cost per loaded mile. Comparing a loaded rate with a cost per total mile makes every load look better than it is.
Seven steps to your minimum rate
Step 1: Add up your fixed costs for a month
Fixed costs are due whether the wheels turn or not. List them monthly:
- Truck and trailer payments (or a depreciation reserve if they are paid off).
- Insurance — liability, physical damage, cargo — as the annual premium ÷ 12.
- Registration and permits: IRP plates, UCR, state permits and the federal heavy vehicle use tax on Form 2290. For a truck with a taxable gross weight over 75,000 pounds, the HVUT is $550 a year, which is about $46 a month.
- ELD, phone, load boards, accounting software, parking and any other subscriptions.
Example: $2,200 truck payment + $1,800 insurance + $200 plates and permits + $100 ELD and phone + $200 other = $4,500 a month.
Step 2: Work out your variable cost per mile
Variable costs rise with every mile. Put each one on a per-mile basis:
- Fuel — use your real average MPG from fuel receipts and a current diesel price. The U.S. Energy Information Administration publishes weekly on-highway diesel prices by region.
- Maintenance and repairs — a per-mile reserve that covers the big jobs, not just oil changes.
- Tires — the cost of a set divided by the miles it lasts.
- Tolls — monthly toll spend ÷ monthly miles.
Example: $3.90 a gallon ÷ 6.5 MPG = $0.60 fuel, plus $0.15 maintenance, $0.05 tires and $0.05 tolls = $0.85 per mile.
Step 3: Decide what you pay yourself
This is the step most rate calculations skip. If the rate only covers the truck, you are working for free and calling what is left over "profit." Pick a per-mile wage for your own driving — the figure you would need to stay in the seat rather than drive for someone else — and treat it as a cost.
Example: a wage of $0.55 per mile. That is an example, not a recommendation; choose your own.
Step 4: Turn it into a cost per mile
Use total miles — every mile the truck rolled, loaded and empty. Example: at 10,000 miles a month, fixed costs are $4,500 ÷ 10,000 = $0.45 per mile, so the cost per mile is $0.45 + $0.85 + $0.55 = $1.85.
Notice how much the mileage matters. The same $4,500 spread over 8,000 miles is $0.56 per mile; over 12,000 miles it is $0.38. If you take more home time some months, run the numbers at your lower mileage too.
Step 5: Adjust for deadhead
If 12% of your miles are empty, only 88% of them earn money, so each loaded mile has to carry the cost of the empty ones. Example: $1.85 ÷ 0.88 = $2.10 per loaded mile. Use your own deadhead share from your ELD or settlement history, not a guess.
Step 6: Account for percentage fees
Dispatch and factoring fees are usually a percentage of the gross pay on the load. Because they grow with the rate, you cannot just add them as a cost per mile — you have to divide by what is left after the fee. Example: an 8% dispatch fee.
Step 7: Add a profit margin
Profit is what lets the business replace the truck, survive a breakdown or a slow month, and grow. Treat it as a share of gross pay, just like the fees:
Example: with an 8% dispatch fee and a 10% target margin, $2.1023 ÷ (1 − 0.08 − 0.10) = $2.1023 ÷ 0.82 = $2.56 per loaded mile. That is the rate to hold your ground on.
The full example
| Line | Per mile | Per month |
|---|---|---|
| Fixed costs (10,000 miles) | $0.45 | $4,500 |
| Fuel ($3.90 ÷ 6.5 MPG) | $0.60 | $6,000 |
| Maintenance, tires, tolls | $0.25 | $2,500 |
| Your wage | $0.55 | $5,500 |
| Cost per total mile | $1.85 | $18,500 |
| Cost per loaded mile (12% deadhead, 8,800 loaded miles) | $2.10 | — |
| Minimum rate per loaded mile (8% fee, 10% margin) | $2.56 | — |
Check: 8,800 loaded miles × $2.5637 = about $22,561 gross. Take away $18,500 of costs and $1,805 of dispatch fees, and about $2,256 is left — 10% of gross, on top of the $5,500 wage. Before income tax, self-employment tax on the wage plus the profit ($7,756 × 92.35% × 15.3%) would be roughly $1,096 for the month.
Checking a real load
A single load rarely matches your average deadhead, so check each offer on its own miles. Divide your cost per total mile by (1 − fee % − margin %) to get the minimum all-in rate, then compare it with what the load pays for its loaded plus empty miles.
Example: $1.85 ÷ 0.82 = $2.26 minimum all-in. A load offers $2,400 for 900 loaded miles, with 150 miles of deadhead to the shipper. Per loaded mile it is $2.67, which looks comfortable. All-in it is $2,400 ÷ 1,050 = $2.29 — just above the $2.26 minimum. The costs on 1,050 miles are $1,942.50 and the fee is $192, so the load leaves $265.50, about 11% of gross. Worth taking, but with almost no room for a long detention or a fuel price jump.
The rate per mile calculator does this check for you, including the break-even pay for the load, and the owner-operator profit calculator shows what a whole year looks like at your average rate.
How your number compares
The American Transportation Research Institute (ATRI) publishes an annual study of trucking operating costs. In its July 2026 report, the industry-average cost to operate a truck in 2025 was $2.336 per mile, 3.4% higher than in 2024, and $1.854 per mile excluding fuel. Those figures are averages from the for-hire carriers ATRI surveys and include driver wages and benefits, so compare them with your cost per mile after your own wage. A big gap in either direction is worth a second look at your inputs — but your number, built from your own costs, is the one to quote from.
Mistakes that make a bad rate look good
- Dividing by loaded miles only when you calculate cost per mile. Use total miles, then adjust for deadhead in step 5.
- Leaving your own pay out. A rate that covers only the truck means you drive for whatever is left.
- Using a good month's mileage. Fixed costs keep coming during home time and breakdowns. Plan with a mileage you hit most months.
- A stale fuel price. At 6.5 MPG, every $0.10 a gallon changes your cost by about $0.015 a mile — roughly $154 a month at 10,000 miles.
- Ignoring percentage fees. An 8% fee on a $2.56 rate is about $0.20 a mile. Divide, don't add.
- Forgetting taxes. Fuel tax is handled through IFTA (see how to file an IFTA quarterly return), and self-employment and income tax come out of your wage and profit. Self-employed drivers can lower their taxable income with the meal allowance — estimate it with the per diem calculator.
Keep the number current
Your minimum rate is only as good as the costs behind it. Re-run it when your insurance renews, when you refinance or pay off the truck, when diesel moves, and at least once a quarter. Write the result down next to your phone — the next time a broker asks your rate, you will know exactly where your floor is and how far above it you want to be.
This guide explains a general pricing method and is not financial or tax advice. Ask a tax professional how self-employment and income tax apply to your situation.