Free trucking tool

Rate Per Mile & Load Profit Calculator

A load that pays well per loaded mile can still lose money once you count the drive to the shipper, fuel, your pay, and the dispatcher's cut. Enter the rate confirmation and your costs — you get the all-in rate per mile, profit on this load, and the lowest rate worth taking. Nothing is stored. Don't know your fixed cost per mile? Get it from the cost per mile calculator first.

The load

Detention, stop-off pay, FSC — if paid separately.

Fuel

Driver & fees

Owner-operator? Enter the wage you pay yourself.

Other costs

Lumper, scale tickets, parking, washout.
Truck payment, insurance, permits, ELD ÷ monthly miles.
Profit on this load
$58.23
Margin 2.4% · $0.05 per mile
Total load pay$2,400.00
Rate per loaded mile$2.40
All-in rate per mile (incl. deadhead)$2.14
Total miles1,120
Fuel$654.77
Driver pay$672.00
Dispatch + factoring$192.00
Maintenance, fixed, tolls & other$823.00
Total cost of the load$2,341.77
Break-even load pay$2,336.71
Break-even rate per loaded mile$2.34

This load pays $2,400.00 ($2.40 per loaded mile, $2.14 all-in) and costs $2,341.77 to run, leaving $58.23 profit. Break-even pay: $2,336.71 ($2.34 per loaded mile).

How this is calculated

Three numbers decide a load: what it pays, how many miles it really takes, and what those miles cost you.

Rate per loaded mile = load pay ÷ loaded miles
All-in rate per mile = load pay ÷ (loaded + deadhead miles)
Profit = load pay − fuel − driver pay − fees − operating costs − tolls − other

Brokers and load boards quote the rate per loaded mile. It is useful for comparing offers, but it ignores the empty miles you drive to get to the shipper. The all-in rate per mile spreads the pay over every mile the truck rolls for that load, which is the figure to compare against your cost per mile.

What goes into the cost of a load

  • Fuel — total miles ÷ MPG × diesel price. Deadhead burns fuel too, so it uses loaded plus empty miles.
  • Driver pay — per mile on all miles, per mile on loaded miles only, or a percentage of the load. Pick the one that matches how you pay (or pay yourself).
  • Dispatch and factoring — a percentage of the load pay. These grow with the rate, which is why they sit in the denominator of the break-even formula.
  • Maintenance & tires — a per-mile reserve, applied to all miles.
  • Fixed costs per mile — your truck payment, insurance, permits and ELD spread over your monthly miles. They are owed whether you take this load or not, but a load has to carry its share.
  • Tolls and other load costs — flat amounts for this trip: tolls, lumpers, scale tickets, parking.

The break-even rate

Break-even pay = (mile-based costs + flat costs) ÷ (1 − fee %)

Because percentage fees rise with the rate, you cannot simply add them to your costs. Dividing by (1 − dispatch % − factoring %) — and the driver percentage, if you pay by percentage — gives the exact pay at which the load leaves $0. Divide that by loaded miles to get the break-even rate per loaded mile you can hold against a broker's offer.

Worked example

Example numbers — not market data

These are the calculator's default inputs, chosen only to show the math. Replace them with your own.

  • Load pays $2,400 for 1,000 loaded miles, with 120 deadhead miles to pickup — 1,120 miles total.
  • Rate per loaded mile: $2,400 ÷ 1,000 = $2.40. All-in: $2,400 ÷ 1,120 = $2.14.
  • Fuel: 1,120 ÷ 6.5 MPG × $3.80 = $654.77. Driver pay: 1,120 × $0.60 = $672.00.
  • Dispatch at 8%: $192.00. Maintenance & tires at $0.20/mi: $224.00. Fixed costs at $0.45/mi: $504.00. Tolls $45 and lumper/other $50.
  • Total cost $2,341.77, so profit is $58.23 — about 2.4% of the load pay.
  • Break-even: ($654.77 + $672 + $224 + $504 + $95) ÷ 0.92 = $2,336.71, or $2.34 per loaded mile.

The lesson in the example: $2.40 a mile sounds solid, but with 120 empty miles, a dispatcher and a full share of fixed costs, it barely clears break-even. Because the driver line already pays the driver (or you), the $58 is what the business keeps on top — but it leaves almost no cushion for a delay or a fuel spike.

Ways to improve a thin load

  • Negotiate on the all-in number. Ask for the deadhead to be covered, or for a higher rate when the pickup is far away.
  • Plan the next load before you book this one. A cheap load into a strong outbound market can beat a better-paying load into a dead zone.
  • Charge for the extras. Detention, extra stops and lumpers belong in accessorials, not in your profit.
  • Read the full guide. How to calculate a profitable rate per mile for owner-operators walks through building your minimum rate step by step.
  • Know your numbers monthly. Re-run the cost per mile calculator when fuel, insurance or your payment changes, and check the bigger picture with the owner-operator profit calculator.

Rate per mile FAQ

Straight answers on the math behind the calculator.

How do I calculate rate per mile for a load?

Divide what the load pays by the miles. Loaded rate per mile = total pay ÷ loaded miles — the number brokers quote. All-in rate per mile = total pay ÷ (loaded miles + deadhead miles) — the number that shows what the truck actually earns for every mile it rolls.

Should deadhead miles count in my rate per mile?

Yes, if you want to know whether the load makes money. Empty miles burn the same fuel and wear as loaded miles but earn nothing, so a load that looks fine per loaded mile can be weak once the drive to the shipper is included. This calculator shows both numbers side by side.

What is a break-even rate in trucking?

It is the total pay at which a load covers every cost and leaves $0 profit. Here it is (fuel + driver pay + per-mile operating costs + tolls + other load costs) ÷ (1 − dispatch % − factoring % − driver % when driver pay is a percentage). Divide it by loaded miles to get the break-even rate per loaded mile.

What should I enter for fixed cost per mile?

Your monthly fixed costs — truck and trailer payments, insurance, permits, ELD — divided by the total miles you run in a month. If you do not know it, the free cost per mile calculator on MyFleetDesk works it out from your monthly numbers. Leaving it at $0 shows only the trip costs, which makes every load look better than it is.

Do dispatch and factoring fees come out of the whole load?

Usually they are a percentage of the gross pay on the rate confirmation, so this calculator applies them to linehaul plus any fuel surcharge and accessorials you enter. Check your own dispatch and factoring agreements — if a fee is charged on linehaul only, enter the surcharge as $0 and add it to linehaul instead.

Is my load information saved anywhere?

No. The math runs in your browser as you type, and nothing you enter is sent to MyFleetDesk or stored. Refreshing the page clears it.

Was this page helpful?

Anonymous: we only count yes and no answers for this page. No personal data is stored.

Sources

The formulas above are standard arithmetic; these official and industry sources cover the inputs.

Last reviewed Oct 2026. Rates and rules change — always confirm with the official source before you file or pay.

Keep every truck's numbers in one place

A calculator answers one load. MyFleetDesk keeps your trucks, trailers, drivers, fuel cards and renewals in one workspace, so the costs behind every rate decision stay current instead of living in a spreadsheet.

Start free with MyFleetDeskTry the Cost per mile calculator

Free tier: 5 trucks, 5 trailers, 5 drivers, 5 fuel cards. No credit card required.

More free trucking calculators

Every tool runs in your browser — no signup, nothing stored. See all free tools.

Cost Per Mile Calculator

Your true trucking cost per mile, break-even rate, and the rate to bid — from your real monthly numbers.

IFTA Calculator

Quarterly fuel tax by state in minutes: miles, gallons and the official rates, done for you.

Disclaimer: This calculator gives estimates for planning only. Results depend entirely on the numbers you enter; it is not financial or tax advice.