Cost Per Mile Calculator for Trucking
Your cost per mile is the single number that decides whether a load makes money or quietly loses it. Enter your real monthly costs below — the calculator updates instantly. No signup, nothing is stored. When you are done, run your quarterly fuel tax with our IFTA calculator.
At 10,000 miles/month your truck costs $13,000.00/mo — $1.30 per mile all-in. Break-even rate per loaded mile (10% deadhead): $1.44. Target rate at a 20% profit margin: $1.81.
How this is calculated
The formula is simple. Getting honest inputs is the work.
Use total miles — every mile the truck rolled that month, loaded and empty. Dividing by loaded miles only makes every load look cheaper than it is. Run the numbers monthly: fuel prices, miles, and payments all move, and last quarter's cost per mile is not this quarter's.
Worked example
These are the calculator's default inputs, chosen only to show the math. Replace them with your own.
- The truck runs 10,000 miles a month, loaded and empty.
- Fixed costs: $2,200 truck payment + $1,800 insurance + $200 permits + $100 ELD and phone + $200 other = $4,500 a month, or $4,500 ÷ 10,000 = $0.45 per mile.
- Fuel: $3.90 a gallon ÷ 6.5 MPG = $0.60 per mile, or $6,000 a month.
- Maintenance $0.15 + tires $0.05 = $0.20 per mile ($2,000 a month). Tolls: $500 a month ($0.05 per mile). Driver pay is left at $0.
- Variable costs: $6,000 + $2,000 + $500 = $8,500 a month, or $0.85 per mile.
- Cost per mile: ($4,500 + $8,500) ÷ 10,000 = $1.30.
- Break-even with 10% deadhead: $1.30 ÷ 0.90 = $1.44 per loaded mile. Target at a 20% margin: $1.444 ÷ 0.80 = $1.81 per loaded mile.
Because driver pay is $0 in the example, $1.30 is what the truck costs before anyone is paid to drive it. Add the wage you pay yourself per mile to see the rate that also covers your pay. For a step-by-step walkthrough, read how to calculate a profitable rate per mile.
What counts as a fixed cost
Fixed costs are due whether the truck moves or not. Spreading them over more miles is the only way to shrink them per mile.
- Truck and trailer payment — or a depreciation reserve if the truck is paid off.
- Insurance — physical damage, liability, cargo; divide the annual premium by 12.
- Permits & plates — IRP registration, UCR, Form 2290 (HVUT), state permits; total them for the year and divide by 12.
- ELD, phone, and software — the subscriptions the operation runs on.
- Other fixed — parking, accounting, load-board subscriptions, office costs.
What counts as a variable cost
Variable costs scale with miles. Fuel is almost always the biggest line, which is why your MPG matters so much: at $3.90 a gallon, moving from 6.0 to 6.5 MPG saves about $0.05 on every mile you run.
- Fuel — fuel price per gallon ÷ MPG gives your fuel cost per mile directly.
- Maintenance & repairs — budget per mile, including a reserve for the big jobs, not just oil changes.
- Tires — a full set spread over its expected life, per mile.
- Driver pay — a company driver's wage, or the wage you pay yourself as an owner-operator.
- Tolls — entered monthly here, since they follow your lanes more than your odometer.
How your number compares
For context, the American Transportation Research Institute (ATRI) reported in July 2026 that the industry-average cost to operate a truck in 2025 was $2.336 per mile, 3.4% higher than in 2024, and $1.854 per mile excluding fuel. ATRI's figures are averages across the for-hire carriers it surveys and include driver wages and benefits, so compare them with your cost per mile after you add your own pay. Your number is the one that matters — a benchmark only tells you if you are far out of line.
Three mistakes that wreck the math
- Forgetting deadhead. If 10% of your miles are empty, a load has to pay more per loaded mile than your cost per mile just to break even. That is exactly what the break-even rate above adjusts for.
- Excluding your own pay. A calculator that leaves driver pay at $0 tells you the truck's cost, not yours. If every load "profits" but nothing reaches your pocket, the wage line is where it went.
- Using a stale fuel price. At 6.5 MPG, a diesel swing of $0.50 a gallon changes your cost per mile by about $0.077 ($0.50 ÷ 6.5) — enough to flip a thin load from profit to loss. Check the current price in the EIA weekly diesel update linked below.
Pair this with our IFTA calculator at quarter-end to estimate the fuel tax you owe each state before you file. To test a specific load against your cost per mile, use the rate per mile & load profit calculator. For a yearly view of what the truck actually leaves you, try the owner-operator profit calculator.
Cost per mile FAQ
Straight answers on the math behind the calculator.
How do I calculate cost per mile for my truck?
Add up everything the truck costs you in a month — fixed costs (payment, insurance, permits, ELD) plus variable costs (fuel, maintenance, tires, tolls, driver pay) — then divide by the total miles you ran that month, loaded and empty. Cost per mile = (fixed costs + variable costs) ÷ total miles. The calculator above does the math live as you type.
What is a good cost per mile for an owner-operator?
It depends on your truck payment, insurance, and whether you count your own pay. Industry-wide, ATRI (American Transportation Research Institute) has reported average fleet operating costs around $2.27–$2.34 per mile including driver wages. A solo owner-operator with a financed truck commonly lands between $1.30 and $1.90 per mile before paying themselves; a paid-off truck can run well under that. The right benchmark is your own number, recalculated monthly.
Should I include my own pay in my cost per mile?
If you want to know what a load truly leaves you after paying yourself, yes — enter a wage under Driver pay ($/mi). Leaving it at $0 shows your operating cost only, which makes thin loads look profitable when they actually pay you nothing. Many owner-operators add $0.50–$0.60 per mile here to represent their own labor.
How does deadhead change my break-even rate?
Empty miles cost the same fuel, tires, and wear but earn nothing, so your break-even rate per loaded mile is higher than your cost per mile. Break-even rate = cost per mile ÷ (1 − deadhead %). Example: at $1.30 per mile with 10% deadhead, you must average $1.44 on every loaded mile just to cover costs.
What is the difference between fixed and variable trucking costs?
Fixed costs stay the same whether you run 500 or 15,000 miles: truck payment, insurance, permits and plates, ELD and phone. Variable costs scale with miles: fuel, maintenance, tires, and per-mile driver pay — plus monthly items like tolls that rise with how much you run. Splitting them shows which costs you can control with more miles and which you cannot.
How often should I recalculate my cost per mile?
Monthly at minimum, and any time something material changes — a new truck payment, an insurance renewal, a fuel-price swing, or a change in your average monthly miles. Fuel is usually your largest variable cost, so a $0.50-per-gallon move in diesel can shift your cost per mile by several cents on its own.
Was this page helpful?
Anonymous: we only count yes and no answers for this page. No personal data is stored.
Sources
The cost-per-mile formula is standard arithmetic; these sources back the benchmark and the cost lines mentioned on this page.
- New ATRI Report Details Accelerating Costs and Low Profitability Despite Cuts (July 15, 2026) American Transportation Research Institute (ATRI) — industry-average operating cost of $2.336 per mile in 2025, $1.854 excluding fuel
- Gasoline and Diesel Fuel Update U.S. Energy Information Administration (EIA) — weekly U.S. and regional on-highway diesel prices, for the diesel price input
- When Form 2290 taxes are due IRS — heavy highway vehicle use tax deadlines; spread the annual tax over 12 months in the permits line
- Instructions for Form 2290 IRS — which vehicles owe HVUT (taxable gross weight of 55,000 lbs or more)
Last reviewed Oct 2026. Rates and rules change — always confirm with the official source before you file or pay.
Track this automatically for every truck
A calculator gives you one truck's number once. MyFleetDesk keeps trucks, trailers, drivers, fuel cards, and renewals in one workspace, so your costs stay current instead of living in a spreadsheet. Start on the free tier — no credit card required.